What is a good straightener? As automakers increasingly rely on lightweighting and advanced structural materials to achieve vehicular fuel efficiency goals. the use of materials with tensile strengths of more than 550kgf/mm2 continues to grow. Research shows adv...

How to choose suitbale coil feeder machine? The modern metal stamper must build capacity and flexibility into his coil-processing and stamping machinery to meet t...

The 3in1 feeder refers to a special equipment for stamping or blanking of metal coils. Specifically, one equipment includes three functions: unwinding, leveling (straightening), feeding, and pressing against punching or shearing during installation. The machine is simple, easy to operate and saves space.The characteristics of the three-in-one feeder are:First, the operation is convenient, the auto...

There are many feeders that can be used in conjunction with punch presses. Air feeders, roller feeders, NC servo feeders, clip feeders, etc. Customers are increasingly choosing in the purchase. It is an NC numerical control feeder. Many customers also have doubts that the NC numerical control feeder is more expensive than the air feeder and the roller feeder. It is slower than the clip feeder. Why...

What are the advantages of HongEr Double Head Decoiler Aiming of Double Head Decoiler Aiming to save the metal coil changing time, improve production efficiency. When the driven coil is over, the backup metal coil will be ready to be...

The Guide of Straightener roller setting The guidelines for establishing proper work roll depth settings tend to vary as much as the potential variations in material types, thickness, and width. For the purpose of these examples we will assume the use of a seve...

How to cool down temperature in the dies? When the stamping product is stretched, the temperature in the dies rises quickly. There is a way to solve it.You will need to use a double-sided lubricator (oilling rollers) at the discharge port of the press feeder. Th...

Big Press Machine & Small Press Feeder, how to work? When you are using a small press feeder to work together with a high tonnage press machine, you need to have a guide device between the press feeder and the dies to ensure the correctness of the feeding (verti...

How to feed thin and soft metal material to press with press feeder? In this case, we can equip the press feeder after the press machine, and pull the waste strip through the dies. ...

Is there a press feeder for sensitive material (easily scratched)? Some materials (aluminum, magnesium and plating materials) are easy to be scratched by the feeding rollers on the normal press feeders.To protect the surfaceWe can use PU coated feeding rollers o...

What is press feeder releasing system?Why releasing is important for press feeders and for feeding precision in metal stamping industry? The purpose of the press feeder releasing system is to eliminate the error after each feeding stroke, to avoid accumulation o...

How to select a suitable press feeder? Consider your coil material, strip width, strip thickness, feeding length, feeding speed and precision requirement.Usually, you need to know what product you want to manufacture with metal stamping line.Next, you are going ...

How many types of press feeders does HongEr provide? There are types of press feeders:High speed gear feeder / cam feederHigh speed gripper feederHigh speed roller feederAir feeder / pneumatic feederZigZag Servo FeederNC Servo Feeder (Pneumatic)NC Servo Feeder ...

Yes. We have Decoiler Straightener 2 in 1 Machines in stock.Models that are usually in stock are:GL-300/GL-400/GL-500We can deliver them within 3-5 days. ...

Yes. We have some decoiler machines in stock.The models are:Standard Decoiler: MT-200/MT-300/MT-400/MT-500/MT-600/MT-700/MT-800Small Decoiler: CR-100/CR-200Flat Decoiler: FU-1000 ...

Yes, we have NC Servo Roller Feeder Machine in stock.Usually the models in stock (of NC Servo Roller Feeder Machine for press) are:RNC-200/ RNC-300/ RNC-400/RNC-500/RNC-600These NC Servo Roller Feeder Machines are suitable for 0.2-3.2mm thickness, and up to 600mm wide strip. ...

Yes, we have all the models of air feeder machine in stock.Air feeder machine is also called pneumatic feeder machine.Usually the air feeder in stock are:AF-1C / AF-2C /AF-3C /AF-4C /AF-5C /AF-6C /AF-7C /AF-8C /AF-9C /AF-10C ...

What is Eccentric Turbine Worm Gear Adjusting? Eccentric Turbine Worm Gear Adjusting is widely used for adjusting straightener rollers in metal stamping industry.But what is Eccentric Turbine Worm Gear Adjusting? What is the other option if we don't want to use it? ...

What Is A "Wedge Type Structure" For Hydraulic Expansion In A Decoiler? Decoilers, also called uncoilers in some countries, are used very widely in different industries / businesses.Whenever we use coils as our raw material, we need decoilers / uncoilers at the very beg...

Which Chinese press feeder manufacturer is good quality and cost-effective? Brief introduction of Chinese press feeder manufacturers in the market At present, the Chinese high quality press feeder manufacturers are mainly concentrated in the two ...

How long is the warranty? HongEr Machine after-sale service is professional and cooperative. We can respond within 0-10 hours.Our machines' warranty is 12 months.Within this period of time, we can maintain the machine for free, except for fa...

What are the payment terms you accept? HongEr Machine accepts various types of payment. The most oftenly used terms are T/T.30% deposit by T/T for us to start the production.70% balance by T/T for us to start the shipping process.If you have...

What are the shipping terms you can provide? HongEr Machine can provide CIF, FOB and EXW shipping terms.Explanations of these terms: CIF - Cost, Insurance, Fr...

How do you pack the machines / equipment? For small machines, we usually pack the machines into wooden box. The machines are wrapped with layers of nylon films first for protection.For big machines, we can fit them into standard containers, 20 GP or 40 GP containers. Th...

Where have you sent machines to? So far, HongEr has sent machines to all over the world, for example, the European area, Australian area, South East Asia area, Middle East area, North America and Latin America area. ...

How do you send the machines abroad from China? HongEr Machine has over 16 years of experience dealing with machines.Our machines are decoiler, straightener, feeder, punch press and other related types.All these types of machines can be sent...

What certificates have you gotten? HongEr Machine Equipment never stopped gaining more certificates to meet requirements of customers from all over the world.Until now, we have gotten CE and ISO certificates for our machines.We are learning ...

Where is HongEr Machine located? HongEr Machine service office is located in Shenzhen, China. Our factory is 1 hour driving from this office, located in Dongguan.Shenzhen is a beautiful and modern city. Our Shenzhen team is equipped with lea...

What Does HongEr Machine Provide? HongEr Machine provides various types of decoiler, straightener, feeder, punch press and other related machines / equipment.Functions of these machines are decoiling metal coils, straightening metal sheets, feeding metal sheets, shearing metal s...